It seemed very easy for me when I started doing it. But later I realised it is no more easy. Adding an item in listview is an ordinary process but keeping the scroll position is a challenge. I did a small research on this but could not find any thing useful. Until I encountered this SO post. It directed me to this amazing link of Chris banes. The following video shows the required final output I achieved.

Problem,

Whenever we add an item and call

adapter.notifyDataSetChanged();

it refresh the listview with new items and hence we lose our current scroll position.

Solution,

While adding new item into a listview, inorder to stop flicking scroll position we need to block laying out children layout of listview. This can be achieved by creating a custom listview.

Two keywords specifies the overscroll-behavior value on the x and

overscroll-behavior = [[](https://developer.mozilla.org/en-US/docs/Web/CSS/Value%5Fdefinition%5Fsyntax

brackets) contain [|](https://developer.mozilla.org/en-US/docs/Web/CSS/Value%5Fdefinition%5Fsyntax

single%5Fbar) none [|](https://developer.mozilla.org/en-US/docs/Web/CSS/Value%5Fdefinition%5Fsyntax

single%5Fbar) auto []](https://developer.mozilla.org/en-US/docs/Web/CSS/Value%5Fdefinition%5Fsyntax

brackets)[{1,2}](https://developer.mozilla.org/en-US/docs/Web/CSS/Value%5Fdefinition%5Fsyntax

curly%5Fbraces)

0 axes respectively. If only one value is specified, both x and y are assumed to have the same value.

The default scroll overflow behavior occurs as normal.

Default scroll overflow behavior (e.g., "bounce" effects) is observed inside the element where this value is set. However, no scroll chaining occurs on neighboring scrolling areas; the underlying elements will not scroll. The

overscroll-behavior = [[](https://developer.mozilla.org/en-US/docs/Web/CSS/Value%5Fdefinition%5Fsyntax

brackets) contain [|](https://developer.mozilla.org/en-US/docs/Web/CSS/Value%5Fdefinition%5Fsyntax

single%5Fbar) none [|](https://developer.mozilla.org/en-US/docs/Web/CSS/Value%5Fdefinition%5Fsyntax

single%5Fbar) auto []](https://developer.mozilla.org/en-US/docs/Web/CSS/Value%5Fdefinition%5Fsyntax

brackets)[{1,2}](https://developer.mozilla.org/en-US/docs/Web/CSS/Value%5Fdefinition%5Fsyntax

curly%5Fbraces)

2 value disables native browser navigation, including the vertical pull-to-refresh gesture and horizontal swipe navigation.

No scroll chaining occurs to neighboring scrolling areas, and default scroll overflow behavior is prevented.

By default, mobile browsers tend to provide a "bounce" effect or even a page refresh when the top or bottom of a page (or other scroll area) is reached. You may also have noticed that when you have a dialog box with scrolling content at the top of a page that also has scrolling content, once the dialog box's scroll boundary is reached, the underlying page will then start to scroll — this is called scroll chaining.

In some cases, these behaviors are not desirable. You can use overscroll-behavior to get rid of unwanted scroll chaining and the browser's Facebook/Twitter app-inspired "pull to refresh"-type behavior.

Note that this property applies only to scroll containers. In particular, since an

overscroll-behavior = [[](https://developer.mozilla.org/en-US/docs/Web/CSS/Value%5Fdefinition%5Fsyntax

brackets) contain [|](https://developer.mozilla.org/en-US/docs/Web/CSS/Value%5Fdefinition%5Fsyntax

single%5Fbar) none [|](https://developer.mozilla.org/en-US/docs/Web/CSS/Value%5Fdefinition%5Fsyntax

single%5Fbar) auto []](https://developer.mozilla.org/en-US/docs/Web/CSS/Value%5Fdefinition%5Fsyntax

brackets)[{1,2}](https://developer.mozilla.org/en-US/docs/Web/CSS/Value%5Fdefinition%5Fsyntax

curly%5Fbraces)

6 is not a scroll container, setting this property on an iframe has no effect. To control scroll chaining from an iframe, set overscroll-behavior on both the

overscroll-behavior = [[](https://developer.mozilla.org/en-US/docs/Web/CSS/Value%5Fdefinition%5Fsyntax

brackets) contain [|](https://developer.mozilla.org/en-US/docs/Web/CSS/Value%5Fdefinition%5Fsyntax

single%5Fbar) none [|](https://developer.mozilla.org/en-US/docs/Web/CSS/Value%5Fdefinition%5Fsyntax

single%5Fbar) auto []](https://developer.mozilla.org/en-US/docs/Web/CSS/Value%5Fdefinition%5Fsyntax

brackets)[{1,2}](https://developer.mozilla.org/en-US/docs/Web/CSS/Value%5Fdefinition%5Fsyntax

curly%5Fbraces)

8 and the

overscroll-behavior = [[](https://developer.mozilla.org/en-US/docs/Web/CSS/Value%5Fdefinition%5Fsyntax

brackets) contain [|](https://developer.mozilla.org/en-US/docs/Web/CSS/Value%5Fdefinition%5Fsyntax

single%5Fbar) none [|](https://developer.mozilla.org/en-US/docs/Web/CSS/Value%5Fdefinition%5Fsyntax

single%5Fbar) auto []](https://developer.mozilla.org/en-US/docs/Web/CSS/Value%5Fdefinition%5Fsyntax

brackets)[{1,2}](https://developer.mozilla.org/en-US/docs/Web/CSS/Value%5Fdefinition%5Fsyntax

curly%5Fbraces)

9 elements of the iframe's document.

Initial value

overscroll-behavior = [[](https://developer.mozilla.org/en-US/docs/Web/CSS/Value%5Fdefinition%5Fsyntax

brackets) contain [|](https://developer.mozilla.org/en-US/docs/Web/CSS/Value%5Fdefinition%5Fsyntax

single%5Fbar) none [|](https://developer.mozilla.org/en-US/docs/Web/CSS/Value%5Fdefinition%5Fsyntax

single%5Fbar) auto []](https://developer.mozilla.org/en-US/docs/Web/CSS/Value%5Fdefinition%5Fsyntax

brackets)[{1,2}](https://developer.mozilla.org/en-US/docs/Web/CSS/Value%5Fdefinition%5Fsyntax

curly%5Fbraces)

1Applies tonon-replaced block-level elements and non-replaced inline-block elementsInheritednoComputed valueas each of the properties of the shorthand:

• overscroll-behavior-x: as specified
• overscroll-behavior-y: as specified Animation typediscrete

overscroll-behavior = [[](https://developer.mozilla.org/en-US/docs/Web/CSS/Value%5Fdefinition%5Fsyntax

brackets) contain [|](https://developer.mozilla.org/en-US/docs/Web/CSS/Value%5Fdefinition%5Fsyntax

single%5Fbar) none [|](https://developer.mozilla.org/en-US/docs/Web/CSS/Value%5Fdefinition%5Fsyntax

single%5Fbar) auto []](https://developer.mozilla.org/en-US/docs/Web/CSS/Value%5Fdefinition%5Fsyntax

brackets)[{1,2}](https://developer.mozilla.org/en-US/docs/Web/CSS/Value%5Fdefinition%5Fsyntax

curly%5Fbraces)

In our overscroll-behavior example (see the source code also), we present a full-page list of fake contacts, and a dialog box containing a chat window.

Both of these areas scroll; normally if you scrolled the chat window until you hit a scroll boundary, the underlying contacts window would start to scroll too, which is not desirable. This can be stopped using overscroll-behavior-y (overscroll-behavior would also work) on the chat window, like this:

.messages {
  height: 220px;
  overflow: auto;
  overscroll-behavior-y: contain;
}

We also wanted to get rid of the standard overscroll effects when the contacts are scrolled to the top or bottom (e.g. Chrome on Android refreshes the page when you scroll past the top boundary). This can be prevented by setting

.messages {
  height: 220px;
  overflow: auto;
  overscroll-behavior-y: contain;
}

5 on the

overscroll-behavior = [[](https://developer.mozilla.org/en-US/docs/Web/CSS/Value%5Fdefinition%5Fsyntax

brackets) contain [|](https://developer.mozilla.org/en-US/docs/Web/CSS/Value%5Fdefinition%5Fsyntax

single%5Fbar) none [|](https://developer.mozilla.org/en-US/docs/Web/CSS/Value%5Fdefinition%5Fsyntax

single%5Fbar) auto []](https://developer.mozilla.org/en-US/docs/Web/CSS/Value%5Fdefinition%5Fsyntax

brackets)[{1,2}](https://developer.mozilla.org/en-US/docs/Web/CSS/Value%5Fdefinition%5Fsyntax

curly%5Fbraces)

8 element:

How to get position in ListView in Android?

//First declare a listview object protected ListView mListView; //Next bind mListView with your listview in the xml (This will be in your onCreate) mListView = (ListView) findViewById(R. id. list_item); //Finally, set an onItemClickListener mListView. setOnItemClickListener(new AdapterView.

What should you use to display a large scrolling list of elements Android?

Lazy Lists Compose gives you a simpler and more-performant way of creating scrolling lists, using fewer lines of code than RecyclerView. Learn how to use lazy layouts to create lists that let add content to lists, on demand.

How to remove space between ListView items in android?

To remove the space under the Listview, you need to set the Margin to "5,0,5,0". The last number represents the height of the bottom thickness, so you need to set it to "0". Also, if you want to remove the space between the Grid. Rows, you can create a custom Style for Grid.

How to populate a list view in Android?

The ListView and GridView are subclasses of AdapterView and they can be populated by binding them to an Adapter, which retrieves data from an external source and creates a View that represents each data entry.