What does IETF stand for in networking?

The IETF is an open international community of network designers, operators, vendors and researchers concerned with the evolution of the Internet architecture and the smooth operation of the Internet.

The IETF was established in 1986 to coordinate the operation, management and evolution of the Internet. It is overseen by the Internet Architecture Board (IAB) and receives administrative support from the Internet Society (ISOC). This arrangement was formalised in 2005 as the IETF Administrative Support Activity (IASA).

  • IETF and ISOC

The Internet Engineering Steering Group (IESG), which is made up of the IETF Area Directors, is responsible for technical management of IETF activities and the Internet standards process.

The work of the IETF takes place in more than 100 working groups, and all decisions are made on the basis of "rough consensus and running code".

RIPE NCC staff and members of the RIPE community take part in many of the IETF's working groups and decision-making processes.

IETF and Internet Number Resources

The IETF is responsible for the management and development of the Internet Protocol Suite, which includes the Transmission Control Protocol (TCP) and the Internet Protocol (IP). This role, which is overseen by the IESG, includes designating IP address ranges for specific purposes (including multicast, documentation, experimental use and general distribution to Internet users); IANA is responsible for carrying out the allocation and assignment of IP addresses according to the IETF's instructions.

The Internet Engineering Task Force (IETF) is a large open international community of network designers, operators, vendors, and researchers concerned with the evolution of the Internet architecture and the smooth operation of the Internet. It is open to any interested individual. The IETF Mission Statement is documented in RFC 3935.

The actual technical work of the IETF is done in its working groups, which are organized by topic into several areas (e.g., routing, transport, security, etc.). Much of the work is handled via mailing lists. The IETF holds meetings three times per year.

The IETF working groups are grouped into areas, and managed by Area Directors, or ADs. The ADs are members of the Internet Engineering Steering Group (IESG). Providing architectural oversight is the Internet Architecture Board, (IAB). The IAB also adjudicates appeals when someone complains that the IESG has failed. The IAB and IESG are chartered by the Internet Society (ISOC) for these purposes. The General Area Director also serves as the chair of the IESG and of the IETF, and is an ex-officio member of the IAB.

The Internet Assigned Numbers Authority (IANA) is the central coordinator for the assignment of unique parameter values for Internet protocols. The IANA is chartered by the Internet Society (ISOC) to act as the clearinghouse to assign and coordinate the use of numerous Internet protocol parameters.

The IETF Standards Process is described in The IETF Standards Process (see also RFC 2026).

New participants in the IETF might find it helpful to read Getting Started in the IETF and The Tao of the IETF, (also available as RFC 4677). First-time attendees may also want to visit the Education (EDU) Team Web site where information and presentations on IETF roles and processes are available.

You must be logged into SDxCentral to view this listing. If you already have a login, click here. Otherwise, please create an account and then log in before viewing this page.

The Internet Engineering Task Force (IETF)

The IETF is the Internet's longest-established technical standardization body, and its open, decentralized structure derives from the Internet's early history. The IETF is more a community than a hierarchical organization. Its roots go back to the late 1960s, when academics and researchers gathered informally to create interconnection standards that are the groundwork of the modern Internet.

As the Internet grew, these informal gatherings became larger, and their areas of activity expanded to cover a wide array of standardization and protocol work. With time, an informal structure of activity emerged, and in January 1986, collaborators assembled in San Diego, California, for the first-ever meeting of the IETF.

IETF Standards Development

The standards developed by the IETF are the product of extended collaboration by Working Groups. The IETF currently has around 130 WGs (the number varies as projects are started, completed, merged, separated, or abandoned) working in eight different topic areas. A large part of the WGs' work takes place online through e-mail discussion lists.

The IETF holds in-person meetings three times a year. As the IETF's own introductory overview document (RFC 3160: The Tao of IETF) describes them:

"The meetings… are week-long dweebfests whose primary goal is to reinvigorate the WGs to get their tasks done, and whose secondary goal is to promote a fair amount of mixing between the WGs and the areas."

All work in the WGs is based on the concept of "rough consensus." WGs do not have formal voting to approve standards; instead, all documents endorsed by a WG -- from early "requirements" drafts to proposed standards themselves -- must be supported by a rough consensus of the working group, meaning that "a very large majority of those who care must agree." Although this means that some disputes can take a very long time to resolve, general feeling in the IETF is that the extra discussion time leads to better, more widely-accepted standards.

Participation in the IETF

Unlike most standards-setting organizations, IETF does not have any formal membership. Its activities are all open to the public. Anyone able to make the necessary commitments of time and technical ability can get involved and have their comments considered equally with all others.

The level of expertise and commitment among IETF participants is high, however, as are the expectations laid on new participants. Participants can sometimes be impatient with novices who ask questions or make suggestions without reviewing past discussions or recognizing technical realities. At the same time, no participant's opinions are viewed as inherently better than any other's. Many in the IETF view this openness as an integral component of the organization's success in creating innovative, technically excellent standards for a network that serves millions.

IETF Documents

Formal IETF documents are published in the "Request For Comments" (RFC) series. There are many forms of RFCs: some document Internet standards, others document "best practices" for network administrators, and still others are purely informational.

All RFCs must be approved by the IESG (see below) prior to publication. RFCs typically start out in draft form in documents known as Internet Drafts (I-Ds). Anyone can write and circulate an I-D, and I-Ds commonly go through a large number of revisions before gaining the support necessary to become RFCs. By definition, I-Ds are only considered to be current for a six-month period, and drafts will be deleted if they are not superceded by subsequent versions or otherwise advanced through the formal standards process. All Internet Drafts and RFCs are available on the IETF web page, //www.ietf.org/.

The authoritative (and much more complete) description of the IETF standards process can be found in RFC 2620: The Internet Standards Process.

IETF Organization

The IETF's work is supported by the Internet Society (ISOC), a membership society of Internet experts and professionals. Technical coordination and overall responsibility for the standards process comes from the Internet Engineering Steering Group (IESG). IESG members are nominated by IETF participants and approved by the ISOC Board of Trustees. Members of the IESG are responsible for coordinating each of the IETF's eight areas of activities, and for providing top-level guidance to the Working Groups in each area. The IESG also comments on and approves all RFCs prior to publication. The IESG is also responsible for chartering and closing Working Groups. However, the IESG does little direct leadership.

The IESG receives architectural coordination from the Internet Architecture Board (IAB), an advisory body that focuses on broad issues of network architecture. IAB is selected in a manner similar to the IESG. Both the IESG and the IAB exist to provide coordination and guidance to the IETF process.

Links

  • The IETF home page: //www.ietf.org/
  • RFC 3160: The Tao of IETF: //www.ietf.org/rfc/rfc3160.txt
  • RFC 2026: The Internet Standards Process: //www.ietf.org/rfc/rfc2026.txt
  • The IAB home page: //www.iab.org/
  • The IESG home page: //www.iesg.org/iesg.html
  • The ISOC home page: //www.isoc.org/

What is IETF in networking?

The Internet Engineering Task Force (IETF) is the leading Internet standards body. It develops open standards through open processes with one goal in mind: to make the Internet work better.

What does the acronym IETF stand for?

Internet Engineering Task Force show sources.

Does the IETF control the Internet?

The IETF makes voluntary standards that are often adopted by Internet users, network operators, and equipment vendors, and it thus helps shape the trajectory of the development of the Internet. But in no way does the IETF control, or even patrol, the Internet.

What are IETF activities?

The IETF works on a broad range of networking technologies which provide foundation for the Internet's growth and evolution..
Automated network management. ... .
Internet of things. ... .
New transport technology. ... .
IETF areas. ... .
Token Binding Protocol..

Bài Viết Liên Quan

Chủ đề