Hi thuspicy4u
I would reset the printer first to clear out any previous network settings.
Turn the printer off, hold down the wireless button and cancel (x button) while turning the printer back on and don't release the two buttons until the printer stops making noise.
//support.hp.com/us-en/document/c02486112
Print out a configuration report and make sure the ssid and ip address are cleared.
(hold down the x button and when the printer makes a noise let go)
After the reset, disconnect the routers power cable, wait 10 seconds, then reconnect the power cable. Wait till it's ready.
Plug the printer back into the mac with the usb cable.
Go to the Mac Harddrive, library, printers, hp,laserjet, P1100_P1560_P1600Series, open htmlconfig. Go to the network tab, select
wireless on the left side, select infrastructure, select network name, select the double arrow button to move the network name over to the left side, fill in passwords, apply. You should get a solid blue wireless light in about 1 minute.
(Note: if the html config doesn't load you will have to update the printers firmware with usb connection)
//h20025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-115797-2&cc=us&dlc=en&lc=en...
Then go to the apple, system preferences, print & scan, highlight the P1102w and click the minus at bottom left corner to delete it, then disconnect usb cable, click plus sign in bottom left corner and highlight the P1102w bonjour printer and click the add button.
Test the printing.
If you need more assistance just let me know.
Gemini02 I work on behalf of HP
Click the Thumbs Up below to say “Thanks” for helping!
hp-concentra-wrapper-portlet
This document is for LaserJet Pro P1102w and P1109w printers.
Install the print driver on a computer with Windows or Mac to set up a wireless connection on your printer.
Setting up the printer on a wireless network (Windows)
Install and connect the printer to your computer over a wireless network.
Gather the network name and password.
Make sure you have the USB cable that came with your printer. The USB cable is required to set up your printer on a wireless network.
Download the full feature software, and then follow the on-screen prompts to install and set up the printer on a wireless network.
When prompted, restart your computer to finish the install.
Setting up the printer on a wireless network (Mac)
Review the steps to set up your printer on wireless network using the HP Utility software.
Follow these steps to set up your printer on wireless network on a Mac.
Gather the network name and pass-phrase.
Connect a USB cable to the USB port on the rear of the printer
, and then to the computer.Make sure the printer firmware is up-to-date.
Go to Software and Driver Downloads, type your printer name, and then press Enter. Install any available firmware updates.
Click the Apple menu, and then click System Preferences.
Depending on your operating system version, click Print & Fax, Print & Scan, or Printers & Scanners.
Click the name of your printer, and then click Options & Supplies.
Click Utility, and then click Open Printer Utility.
Click HTML Config to open the advanced printer settings window.
Click the Networking tab, and then click Wireless in the left pane.
Click 802.11b/g/n Wireless, and then select Enabled from the pop-up menu.
Double-click your network name to add it to the Current Network Name field, enter the network pass-phrase, and then click Apply.
Add your network name to the Current Network Name (SSID) field
Enter your network pass-phrase
Disconnect the USB cable from the printer and the computer.
In the Printers & Scanners, Print & Scan, or Print & Fax window, click the name of your printer, click the minus sign
, and then delete the USB-installed printer.Click the plus sign
, and then click Add Printer or Scanner.Click the name of your printer with Bonjour as the kind, click the Use or Print Using box, and then select the name of your printer in the pop-up menu.
Click Add to add the printer to the list.
hp-detect-load-my-device-portlet